If you’re looking for a way to give your bathroom a stylish and unique update, consider repurposing an old dresser into a bathroom vanity. Not only is this a fun and creative DIY project, but it’s also a great way to save money on a bathroom remodel. Here’s how to do it:
Choose your dresser
The first step in repurposing an old dresser into a bathroom vanity is to choose the right piece of furniture. Look for a dresser that’s the right height and width for your bathroom space and has enough storage for your needs. You’ll also want to consider the style of the dresser and how it will fit with the overall aesthetic of your bathroom.
Remove the drawers and hardware
Once you’ve chosen your dresser, remove all the drawers and their hardware. You’ll be replacing the hardware with new drawer pulls later, so set the old hardware aside for now. You’ll also want to remove any decorative elements on the dresser that may get in the way of the sink and plumbing.
Cut a hole for the sink
Using a jigsaw, cut a hole in the top of the dresser where you want the sink to go. Be sure to measure and mark the hole carefully to ensure that it’s centered and the right size for your sink. You’ll also need to drill a hole in the back of the dresser for the plumbing.
Install the sink and plumbing
Install the sink and plumbing in the dresser. This may involve cutting and fitting pipes to ensure that everything fits together properly. If you’re not comfortable with plumbing, it’s a good idea to hire a professional to help you with this step.
Installing the sink and plumbing in the dresser is a crucial step in repurposing an old dresser into a bathroom vanity. Here are the steps to follow:
- Measure and mark the location of the sink: Before you begin, measure and mark the location of the sink on the top of the dresser. This will help you determine where to place the plumbing and how to cut the hole for the sink.
- Cut the hole for the sink: Use a jigsaw to cut a hole in the top of the dresser where you want the sink to go. Be sure to measure and mark the hole carefully to ensure that it’s centered and the right size for your sink.
- Install the drain and tailpiece: Insert the drain assembly through the bottom of the sink and tighten the nut on the underside to secure it in place. Then, insert the tailpiece into the drain assembly and tighten it.
- Install the faucet: Follow the manufacturer’s instructions to install the faucet on the sink. Be sure to attach the water supply lines to the faucet and turn off the water supply valves before doing so.
- Install the P-trap and plumbing: Attach the P-trap to the tailpiece and tighten it with pliers. Then, connect the P-trap to the existing plumbing in your bathroom. You may need to cut and fit pipes to ensure that everything fits together properly.
- Test for leaks: Once you’ve installed the sink and plumbing, turn on the water supply valves and test for leaks. Check the connections between the sink, faucet, and plumbing to make sure they’re all tight and secure.
- Secure the sink to the dresser: Finally, use silicone caulk to seal the edges of the sink to the top of the dresser. This will help prevent water from seeping into the dresser and causing damage.
Sand and paint the dresser
Sand the dresser to remove any rough spots or old paint or varnish. Then, paint or stain the dresser in the color of your choice. You may want to use a waterproof sealant to protect the dresser from moisture and humidity in the bathroom.
Use a sanding block or an electric sander to sand the dresser. Start with a coarse grit sandpaper, such as 80-grit, to remove any rough spots, then move to a finer grit, such as 120-grit, to smooth the surface. Be sure to sand in the direction of the wood grain.
After sanding, wipe down the dresser with a damp cloth to remove any dust or debris. Let it dry completely before moving on to the next step.
Apply a coat of primer to the dresser using a paintbrush or roller. This will help the paint adhere better and provide a smoother finish. Let the primer dry completely before moving on to the next step.
Once the primer has dried, it’s time to paint the dresser. Use a paintbrush or roller to apply a thin coat of paint. You may need to apply multiple coats, depending on the color and quality of the paint. Let each coat dry completely before applying the next.
Install new hardware and drawers
Once the dresser is dry, install new hardware on the drawers and reinsert them into the dresser. You may want to line the drawers with contact paper to protect them from moisture.
Install the vanity in your bathroom
Finally, install your new bathroom vanity in your bathroom. You may need to secure it to the wall to ensure that it’s stable and won’t tip over. Once it’s in place, you can add decorative elements like a mirror, towels, and a soap dish to complete the look.
Repurposing an old dresser into a bathroom vanity is a fun and creative DIY project that can transform your bathroom into a stylish and unique space. With a little bit of elbow grease and some basic plumbing skills, you can create a beautiful and functional piece of furniture that will add character and charm to your home.
Photos taken from: